|Purification Capacity||15 liters/ hour|
|Max. Duty Cycle||75 liters/ day|
|Storage Tank Capacity||Hydrostatic Storage Tank of 8 Liters with Stainless Steel Faucet to mount on the Kitchen Platform|
|Fliter Cartridges||10" Polypropylene Sediment, Granular Activated Carbon, Activated Carbon Block|
|RO Element||TW-1812-75 GPD|
|UV Lamp||11.00 Watt, Philips|
|Inlet Water Pressure(Min)||0.3 kg/ cm2|
|Power Supply||24V DC, 2.5Amps|
|Input Voltage||90 - 300V AC, 50Hz/60Hz|
|Pressure Guage||2", 0 - 300 PSI, 1 No.|
Permeate Pump is a simple, yet revolutionary, device. Powered only by the hydraulic energy of brine water usually lost to the drain (i.e. no electricity required), the Permeate Pump forces product water into the storage tank, reducing membrane back pressure and maximizing available feed pressure. This pump dramatically improves the efficiency of RO water production, reducing wastewater by up to 80%. In other words, if your current system requires 10 liters of tap water to produce a Liter of pure water (10:1), adding a Permeate Pump should reduce this ratio below 3:1. This pump can also bring storage tank up to line pressure and then shut the system down when tank reaches its capacity, eliminating the need for a hydraulic shut-o valve. Other benefits include higher delivery pressures, faster RO water production, superior water quality, and extended liter/membrane life.
***Under test conditions
Note : Purifier not recommended for installation at above 2000ppm of feed water.
Due to continuous developments, product specifications may change without notice.